Fuel Rail Pressure Sensor for Ford Ranger PJ PK Mazda BT50 3.0 Diesel 0281006018

This Fuel Rail Pressure Sensor for Ford Ranger PJ PK Mazda BT50 is designed to accurately monitor the fuel pressure in the rail system, ensuring proper fuel delivery and optimal engine performance.
A direct replacement for a faulty or worn pressure sensor that can cause hard starting, engine misfires, poor fuel economy, or loss of power.

Compatibility for: 

Ford Ranger PJ 11/2006 – 03/2009

• Ford Ranger PJ 3.0 TD (Rear Wheel Drive Ute – 4cyl 3.0L Diesel)
• Ford Ranger PJ 3.0 TD (All-Wheel Drive Ute – 4cyl 3.0L Diesel)
• Ford Ranger PJ 3.0 TDdi 4×4 (All-Wheel Drive Cab Chassis – 4cyl 3.0L Diesel)

Ford Ranger PK 03/2009 – 11/2011

• Ford Ranger PK 3.0 TDdi (Rear Wheel Drive Ute – 4cyl 3.0L Diesel)
• Ford Ranger PK 3.0 TDdi (Rear Wheel Drive Cab Chassis – 4cyl 3.0L Diesel)
• Ford Ranger PK 3.0 TDdi 4×4 (All-Wheel Drive Ute – 4cyl 3.0L Diesel)
• Ford Ranger PK 3.0 TDdi 4×4 (All-Wheel Drive Cab Chassis – 4cyl 3.0L Diesel)

Mazda BT-50 CD / UN

• Mazda BT-50 CD, UN 12/2006 – 12/2011 3.0 CDVi (Rear Wheel Drive Ute — 4cyl 3.0L Diesel)
• Mazda BT-50 CD, UN 12/2006 – 12/2011 3.0 CDVi (Rear Wheel Drive Cab Chassis — 4cyl 3.0L Diesel)
• Mazda BT-50 CD, UN 10/2006 – 12/2011 3.0 CDVi 4×4 (All-Wheel Drive Ute — 4cyl 3.0L Diesel)
• Mazda BT-50 CD, UN 12/2006 – 12/2011 3.0 CDVi 4×4 (All-Wheel Drive Cab Chassis — 4cyl 3.0L Diesel)

Reference OEM: 0281006018

Important note:  

• After installing a new fuel rail pressure sensor, the vehicle’s ECU may need to be reset or recalibrated to correctly read the new sensor values.
• If you are unsure how to do this, it is recommended to have the installation performed by a professional mechanic.

Features:

• Direct replacement – plug & play installation
• Accurately monitors fuel pressure for stable engine performance
• Helps restore proper fuel delivery and reduce fuel consumption
• Built to meet or exceed OEM standards
• Durable and reliable construction with high-quality materials

Specification:

• Type: Fuel Rail Pressure Sensor
• Material: Metal, plastic, and electronic components
• Connector: 3 pins
• Thread Diameter: M18x1,5
• Color: Black and silver

How to replace a Fuel Rail Pressure Sensor:

• STEP 1: Turn off the engine and disconnect the negative battery terminal.
• STEP 2: Locate the fuel rail pressure sensor on the fuel rail (usually near the injectors).
• STEP 3: Release fuel system pressure before disconnecting the sensor.
• STEP 4: Unplug the electrical connector and unscrew the old sensor carefully.
• STEP 5: Install the new sensor and reconnect the wiring harness.
• STEP 6: Reconnect the battery terminal and start the engine.
• STEP 7: Check for leaks and ensure smooth engine operation.

Package includes: Fuel Rail Pressure Sensor