Description
This complete remote car key for Mazda 3 BL 2009 – 2014 series. High-quality replacement car key with transponder and chip, full assembly and ready to be programmed for your car. Replace your old key or just make it a spare. Spec: Chip 4D63, 433 MHz, 2 Button. It includes a 2-button key shell case, uncut key blade, remote transponder and 433MHz chip, battery.
Fitment with the following models:
- Mazda 3 BL 2009 – 2014 series
Features:
- 100% COMPATIBILITY: This is a complete remote key for Mazda.
- READY FOR PROGRAMMING: This replacement key is assembled and ready for programming
- GOOD QUALITY REPLACEMENT: Complete Remote Car Key replacement for a key with broken buttons, worn or lost key case
- DURABLE KEY SHELL: Made of high-quality materials, highly durable.
- TRANSPONDER CHIP 433 Mhz includes remote control unlock and lock button
Specification:
- FCCID: SKE126-01 or SKE126-A1
- CMIIT ID: 2009DJ4585
- Frequency: 433Mhz
- Transmitter: CC33-67-5RYC
- Chip: 4D63 80Bit
- Material: Plastic + Metal
- Colour: Black
- Button: 2 Buttons
- Blade: MAZ24R
- Battery included
- Fits Mazda
- Programming: by yourself
NOTES:
- You will need to have at least one original working either black key or another remote key. It will not work if you have service grey key
- You must check your key to ensure the part number is the same. CMIIT ID 2009DJ4585. You can also check the SKE – can be either SKE126-01 or SKE126-A1. (To check, disassemble your original key down, do it this way if you are replacing the battery and check the number stamped on the remote.)
- The key will need to be cut and programmed by either a Locksmith or programmed yourself by following the instructions listed
Before a new key is programmed: the new car key will need to be cut by a Locksmith (also you can program by either a Locksmith or yourself by following the instructions listed.) Car Key Programming instructions are presented below. Programming INSTRUCTIONS include two stages: 1) “How to program the remote control” and 2) How to program the car key to start (Programming the transponder chip)”
INSTRUCTIONS:
1) How to program the remote control – Do it yourself:
- 1. Open Driver side door
- 2. Put the Original key in and out of ignition 2 times
- 3. Close and open driver door 2 times
- 4. Put Original Key in and out of ignition once
- 5. Shut and open door twice
- 6. Close door
- 7. Insert key Turn ignition on
- 8. Turn ignition off and remove key
- 9. Door locks will cycle
- 10.Press lock and unlock together for 1 second then lock button
- (To delete remotes turn the key on and off 5 times, door locks will cycle 5 times. Turn the key on then off. Open shut door)
- 11. Locks will cycle put key in ignition turn to on then off
- 12. Remove key from ignition, close door and test remote
2) How to program your car key to start (Programming the transponder chip) – do it yourself:
- 1. Put Original master key in and out of ignition 5 times. Finish with key in ignition
- 2. Open and shut door 6 times
- 3. Remove original, insert new key
- 4. Leave for 60 seconds (or till Security light goes out on dashboard)
- 5. After 60 seconds security light stops flashing then you can start car.
- 6. Take key out
- 7. Open and shut door
Package Includes:
- 1 X Complete Remote Car Key, 1х Battery
Reviews
There are no reviews yet.