Complete Remote Car Key For Suzuki Grand Vitara 2005 – 2013

Complete Remote Car Key suitable for SUZUKI GRAND VITARA. It's a good way to buy a new remote key for your car. This is a complete remote / key with all the interior (remote / electronics / transponder chips / battery) unit. Key will need to be cut and programmed by either a Locksmith or Suzuki dealer

Fitment and Suitable for:

• Suzuki Grand Vitara 2005 2006 2007 2008 2009 2010 2011 2012 2013

• Replacement part number 37145-55JU0 or 37145-55AJ0 (Usually you can find the model number or part number on the label of the key or open the back cover to find it.)
• Comes with 433MHz transponder chip ID46
• The key transponder chip programming must be performed by an authorized locksmith or dealer.
• Uncut blade (get the blade cut by a local locksmith/dealer or swap the blade with your original)
• Battery included in the key remote
• A perfect replacement for your damaged/worn remote key
• This key does not come with any emblem or logos

Specification:

• Model: COMPLETE REMOTE CAR KEY TS004
• Remote Frequency: 433MHZ
• Buttons:2
• Blade: HU87 (UNCUT)
• Transponder Chip: ID46
• FCC ID: KBRTS004
• No logo or part numbers on remote key

Package Content:

• 1X COMPLETE REMOTE CAR KEY ( Transponder chip + remote car key + shell cover)
• 1X Battery

NOTES:

• Please check the frequency and chip of your original key before purchase

• The key transponder chip programming must be performed by an authorized locksmith or dealer.

• Key blade will need to be cut (this key is UNCUT)

• Up to 3 remotes can be learned by the vehicle.

How to program remote yourself:

Preparatory Steps

• Sit in vehicle with driver’s door open and all other doors closed.

• 1. Insert your original key and turn it to the "On" position and back to "Off."
• 2. Close and open the driver's door three times. Insert and remove the key.
• 3. Wait for the locks to automatically cycle. Press and hold the "Unlock" button on your remote.
• 4. Hold the button until the locks cycle again. This completes the programming procedure.

This procedure will program the remote, but you will need to have the key cut and transponder chip programmed at a locksmith shop or dealer.